EasyManua.ls Logo

Doosan DISD SD 310 - General Safety Essentials

Doosan DISD SD 310
696 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GENERAL SAFETY ESSENTIALS
ACCESSORY APPLICATIONS
This wheel loader has been designed primarily for moving earth with a bucket. For use as a grapple or for
other object handling, contact Daewoo. Lifting-work applications are permitted in approved lift configuration,
to rated capacity only, with no side-loading (unless prohibited by local regulation). Do not use machine for
activities for which it was not intended. Do not use bucket for lifting work, unless lift slings are used in
approved configuration.
LOCATION OF SAFETY LABELS
Location of safety labels (decals) can vary from unit to unit. Refer to appropriate Operation and Maintenance
Manual, and Parts Manual for your unit.
There are several specific warning signs on this machine. The exact location of hazards and the description
of the hazards are reviewed in the appropriate Operation and Maintenance Manual.
Please become familiarized with all warning signs.
Make sure that all of the warning signs are legible. Clean the warning signs or replace the warning signs if
you cannot read the words. Replace the illustrations if the illustrations are not visible. When you clean the
warning signs, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean
the safety signs. Solvents, gasoline, or other harsh chemicals could loosen the adhesive that secures the
warning sign. Loose adhesive will allow the warning sign to fall off.
Replace any safety sign that is damaged, or missing. If a safety sign is attached to a part that is replaced,
install a safety sign on the replacement part.
UNAUTHORIZED MODIFICATIONS
Any modification made without authorization or written approval from Daewoo can create a safety hazard, for
which the machine owner must be held responsible.
For safety‘s sake, replace all OEM parts with the correct authorized or genuine Daewoo part. For example,
not taking the time to replace fasteners, bolts or nuts with the correct replacement parts could lead to a
condition in which the safety of critical assemblies is dangerously compromised.
S0103010K Wheel Loader Safety
Page 6

Table of Contents

Related product manuals