PREFACE
This documentation has been developped for the skilled Serviceman, trained by the Zahnradfabrik Passau
for the Repair and Maintenance operations on ZF-Units.
Treated is a ZF-Serial product according to the design stage of the date of Edition.
However, due to further technical developments of the product, the repair of the unit at your disposal could
require differents steps as well as other adjustment and testing specifications.
Therefore, we recommend to commit your ZF-Product to Masters and to Service-men, whose practical and
theoretical training is constantly completed to the actual situation in our Training School.
The Service Stations, established by the Zahnradfabrik Friedrichshafen all over the world, offer you:
I. Constantly trained personnel
2. Prescribed installations, e.g. Special Tools
3. Genuine ZF-Spare Parts according to the latest phase of development
Here, all operations are carried out for you with utmost care and realibity.
Repair operations carried out by ZF-Service Stations, arc covered additionally within the terms of the actual
contractual conditions, by the ZF-Warranty.
Damages caused by inappropriate or inexpert work, carried out by personnel foreign to ZF, and after-
expenditures eventually arising from it, are excluded from this contractual responsibility.
This applies also in case of a renouncement of Genuine ZF-Spare Parts.
Zahnradfabrik Passau GmbH
Service Department
Transmission and Torque Converter SPC000007
Page 3
To Next Page
Loading...
