I. ELECTRO-HYDRAULIC GEARBOX CONTROL
ATTENTION :
In case of malfunctions of the Transmission because of a defective gearbox control, we recommend the
replacement of the complete gearbox control.
The pressure-control curve of the replacement-gearbox control (see corresponding Spare Parts List)
has been accordingly adapted to the Transmission Version, resp. to the Vehicle type.
Modifications concerning the pressure-control curve may not be carried out without agreement of ZF.
Therefore, the repair of gearbox control units should be carried out by ZF Service stations only.
The relative shop equipment of our Service stations (gearbox control resp. transmission
test benches) as well as constantly trained personnel ensure a professional repair.
The following Disassembly and Reassembly Instructions (Page 1.01 - 1.73) will therefore be useful only
as an Information for ZF-Service stations as well as for the Manufacturer of the vehicle, which are
disposing of the required workshop equipment and especially trained personnel.
SPC000007 Transmission and Torque Converter
Page 12
To Next Page
Loading...
