MACHINE OPERATION
If you need more information or have any questions or concerns about safe operating procedures
or working the wheel loader correctly in a particular application or in the specific conditions of
your individual operating environment, please consult your local DISD representative.
OPERATE WHILE SEATED AT OPERATOR’S
STATION ONLY
Never reach in through a window to work a control.
Do not try to operate wheel loader unless you‘re in
command position - seated at controls. You should
stay alert and focused on your work at all times. Do
not twist out of seat if job activity behind you (or to
the side) requires your attention.
Use a spotter or signal person if you cannot see
clearly and something is happening behind you.
Replace damaged safety labels and lost or
damaged operator‘s manuals.
Do not let anyone operate machine unless they‘ve
been fully and completely trained, in safety and in
operation of the machine.
SEAT BELTS SHOULD BE USED AT ALL TIMES
Whenever engine is running, operator should be
seated at the control station with seat belt properly
engaged.
MOVEMENT ALARMS
If wheel loader is equipped with an audible travel movement alarm, test alarm on a daily basis. Audible alarm
should sound as soon as travel system is engaged.
Wheel Loader Safety S0103010K
Page 17
To Next Page
Loading...
