Doosan DISD SD 310 - List of Lubricants TE-ML 03

Torque converter transmissions for off-road vehicles and
machinery (construction plant, special vehicles, lift trucks) List of Lubricants TE-ML 03
Transmission
Approved lubricants
WG 80/81/53/85
WO 100
WG 120/121
WG 150/151
WG I80/ 181
WG 200/201
WG 250
WG 65
HN 500
PW 45 H ( I)
PW25H
PW 18 H
HSt 210
Engine oils
API CD/ CE/CF/ SF/ SG
MIL-L-2104 O -D/ -E
MILL-46152C/-D/-E
• SAEI0W
• SAE 10 W-30
• SAE 10 W-40
• SAE 15 W-40
• SAE 20 W-20
For commercial products see overleaf
Automatic Transmission Fluids (ATF) only at ambient
temperatures below - 1 0 
Oil grade
Minimum oil temperature for starting
engine
Minimum oil temperature for
starting vehicle moving
- Engine oils
SAE 20 W-20
SAE 15 W-40
SAE 10 W. 10 W-30.10 W-40
- ATF
- 10 °C
- 15 
- 2 0°C
- 30 °C
• 5 *C
- 0 °C
- 5 °C
- 10 °C
The minimum oil temperature for starting the vehicle moving can be achieved by:
- at least 20 minutes' warm-up m "Neutral" setting
- preheating
At greasing points, use a multi-purpose grease with the following properties
lithium soap, drop point above 170. NLGI Class 2.
The grease must be anti-corrosive. water-resistant and walk stable.
Note to lubricant suppliers: Please inform ZF immediately of any changes to the composition or trade names of approved
products, and of differences in quality between German) and ocher countries.
This list can be obtained through any 2P
After-Sales Service point
Zahnradfabrik Passau GmbH Telephone (0851)494-0
Postfach 26 40 Telex 57849zp d
D-8390 Passau Telefax (0851)45340
Transmission and Torque Converter SPC000007
Page 11