SHUTDOWN CONTROL FUNCTIONS
After bucket has been lowered to overnight storage position, move all switches and controls to "OFF"
position. Pull parking brake knob to "APPLIED" position. This will apply parking brake. Move pilot cutoff
switch to "LOCK" position. This will disable pilot control valve lever (joystick). Move key in starter switch to
"OFF" position, and remove key from switch.
Engage all lock-down security equipment that may have been installed on machine.
When hydraulic system maintenance or service work must be performed, be aware that
accumulators in system store fluid under pressure after system has been shut down. To release
hydraulic pressure in accumulators, operate control with engine "OFF" until accumulator pressure
is completely dissipated.
NEVER LET ANYONE RIDE ON ATTACHMENT
Never let anyone ride on any work attachment, such
as the bucket, crusher, grapple, or clamshell (grab
bucket). There is a danger of the person falling and
suffering serious injury.
Wheel Loader Safety S0103010K
Page 23
To Next Page
Loading...
