PROPER TOOLS
Use only tools suited to the task. Using damaged,
low qualify, faulty, or makeshift tools could cause
personal injury. There is danger that pieces from,
chisels with crushed heads, or hammers, may get
into your eyes and cause blindness.
USE OF LIGHTING
When checking fuel, oil, battery electrolyte, or
window washing fluid, always use lighting with anti-
explosion specifications. If such lighting equipment
is not used, there is danger of explosion.
If work is carried out in dark places without using
lighting, it may lead to injury, so always use proper
lighting.
Even if the place is dark, never use a lighter or
flame instead of lighting. There is danger of fire.
There is also danger that the battery gas may catch
fire and cause and explosion.
FIRE PREVENTION AND EXPLOSION PREVENTION
All fuels, most lubricants and some coolant mixtures are flammable. Leaking fuel or fuel that is spilled onto
hot surfaces or onto electrical components can cause a fire.
Store all fuels and all lubricants in properly marked containers and away from all unauthorized persons.
Store oily rags and other flammable material in a protective container.
Do not smoke while you refuel the machine or while you are in a refueling area.
Do not smoke in battery charging areas or in areas the contain flammable material.
Clean all electrical connections and tighten all electrical connections. Check the electrical wires daily for
wires that are loose of frayed. Tighten all lose electrical wires before you operate the machine. Repair all
frayed electrical wires before you operate the machine.
Remove all flammable materials before they accumulate on the machine.
Do not weld on pipes or on tubes that contain flammable fluids. Do not flame cut on pipes or on tubes that
contain flammable fluids. Before you weld on pipes or on tubes or before you flame cut on pipes or on tubes,
clean the pipes or tubes thoroughly with a nonflammable solvent.
Wheel Loader Safety S0103010K
Page 25
To Next Page
Loading...
