Doosan DISD SD 310 - Page 328

3.1.8 FINAL DRIVE - VERSION WITH
DRUM BRAKE
Remove lock plate and loosen hex. head screws.
Pry output flange off the shaft.
(S) Pry bar 5870 345 065
Tilt gear case 180°.
Loosen hex. head screws.
Separate brake drum from output flange.
(S) Crow bar 5870 345 071
SPC000007 Transmission and Torque Converter
Page 100
Figure 60
Figure 61
Figure 62
Figure 63