Doosan DISD SD 310 - Page 418

6. AXLE DIFFERENTIAL
6.1 SHIFT-CONTROL HOUSING
6.1.1 DISASSEMBLY
Pull off output flange.
Loosen socke head screws and separate axle
declutch unit from gear case by means of pry bar.
( S ) Pry bar 5870 345 065
Remove hollow shaft.
Loosen the two socket head screws and remove
them along with disk.
SPC000007 Transmission and Torque Converter
Page 190
Figure 1
Figure 2
Figure 3
Figure 4