5. Assemble asbestos gasket before oil seal on the
small side of hub,then screw the bolts tight
Note: Fastening torque
40 ~ 10Nm
Letai 262 threat fastening sealant
Fasten all screws according to symmetrical and
crossing principle.
6. Assemble brake disc on hub and fasten with bolts
and gaskets.
Note: Fastening torque
360±20Nm
Fasten all screws according to symmetrical and
crossing principle.
Assemble planet carrier assembly
1. Stick lubrication grease quill roller (27 units each)
on walls of inner holes of planet gears, assemble
baffle ring in the middle of quill roller.
2. Assemble gaskets at both sides of planet gear,.
Rear Axle SPC000010
Page 33
To Next Page
Loading...
