Storage and usage of brake fluid
1. Brake fluid belongs to inflammable goods; please pay Note to avoid evaporation and fire during usage
and storage.
2. Brake fluid shall be stored in warehouse or other assigned place, but it cannot be stored in open air and
close to hot source to avoid deteriorating and become invalid.
3. The using department shall set up independent room for storage and there must be obvoid marks.
4. It is forbidden to mix and use brake fluid of different brands to avoid layering and lose braking effect.
5. There must be special containers to store brake fluid to avoid mixing of other oil and cause reaction and
invalidity.
6. Containers storing brake fluid must be clean and covered to avoid mechanical sundries and water. If the
surface of brake fluid has dust and sundries, they must be removed before using, do not mix them, clean
and special tool shall be used to add brake fluid.
Replacement of brake fluid and Notes:
Technicians shall guide clients to use and replace brake fluid strictly, when following conditions appear, all
brake fluid must be replaced immediately.
1. When brake fluid is mixed with mineral substance, such as gas oil and diesel.
2. When vehicle is travelling normally, brake is light and heavy.
3. When brake fluid in the system is less or when the vehicle having liquid level is warning.
4. When oil color of brake fluid is muddy or there are sundries and sediment.
Notes during replacement:
1. When replacing brake fluid, clean the residual liquid in brake system, and check new brake liquid.
2. When replacing brake fluid, try to reduce the contacting time between brake fluid and air to avoid
reducing performance of brake fluid.
3. Before replacing brake fluid, it is better to clean brake system with alcohol, release air in the oilway after
replacement.
Treatment of air source
1. Clean air filter core in time.
2. Release water from air tank in time.
SPC000021 Brake System
Page 10
To Next Page
Loading...
