Dover HEIL Command-SST - Loader Preventive Maintenance Chart; Loader Lubrication Guide

Issued June 2020
Maintenance
Copyright 2020, Heil Environmental
Printed in U.S.A.
139
LOADER PREVENTIVE MAINTENANCE CHART
Maintenance performed on a regular schedule is preventive maintenance. Normal maintenance intervals are based on an
8-hour day and average operating conditions. Severe use or adverse conditions make it necessary to do this maintenance
more frequently.
REF NO.
ACTIVITY
INTERVAL
SERVICE/CHECK
1
Grease Lift
Weekly
(40 hrs)
See the Loader Lubrication Guide or the lubrication
decal on the lift arm.
2
Hydraulic Plumbing
Weekly
(40 hrs)
Check for damage, worn, or leaking hoses, tubes or
fittings. Replace as necessary. NOTE: Do not replace
steel tubes with hoses.
3
Check Lift Body Mount
Base Bolts
Weekly
(40 hrs)
Inspect the bolts clamping the arm to the main pivot boss
for looseness or damage. Replace if damaged.
4
Grabber Assembly with Belt
Weekly
(40 hrs)
Inspect belt condition for wear, cuts or damage. Replace
if present.
5
Hoses
Weekly
(40 hrs)
Check for tears, wear or holes. Replace if present.
6
Loader Main Arm Pivot
Monthly
(200 hrs)
Inspect for damage/wear. Replace if present.
7
Loader Arm Wear Pads
Monthly
(200 hrs)
Check wear pads for excessive wear. Replace if present.
See Loader Arm Wear Pads for acceptable wear
values.
140
142