Issued June 2020
Introduction
Copyright 2020, Heil Environmental
Printed in U.S.A.
22
The refuse collection container
The complete body assembly or the area of the body where the refuse is stored.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
The fully retracted position of a cylinder
computer control system that continuously monitors the state of input devices and makes
decisions based upon a custom program to control the state of output devices.
activation of the packer extend push button. See Auto/Manual Pack Mode in Features .
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Make a cylinder rod move out its base /
Command to move the packer panel towards the body
Damage to the lid(s) of the refuse bins (containers) that interferes with unloading the refuse
The packer/extend cylinder is fully retracted and the packer panel is all the way to the front of the
hopper. May also be referred to as “Home Position” or “Front Head”.
The entire grabber assembly or the grabber arms.
The command to close the grabber arms around a refuse container.
An action that causes death, injury or property damage.
A potential source of harm.
63
63
To Next Page
Loading...