Dover HEIL Command-SST - Propping the Tailgate (Continued)

Issued June 2020
Operation
Copyright 2020, Heil Environmental
Printed in U.S.A.
81
PROPPING THE TAILGATE (CONTINUED)
B.How to Store the Tailgate Props
1. When you finish using the props, take the unit out of
the Lock-Out/Tag-Out mode, insert the ignition key,
and start the engine.
2. RAISE the tailgate enough so that you can REMOVE
each prop bar from its pin, then ROTATE each prop
so that you can put the props in the stored position.
3. SECURE each prop with a pin.
4. LOWER the tailgate until it is completely CLOSED.
5. LOCK the tailgate.
Figure 46. Factory Tailgate Props