Issued June 2020
Operation
Copyright 2020, Heil Environmental
Printed in U.S.A.
56
INSPECT PER APPLICABLE MANUFACTURER MANUAL
Tractor and Chassis Electrical
Engine & Transmission & Fluid Levels
Tractor, 5th Wheel and Chassis Lubrication
REFUSE COLLECTION SYSTEMS AND COMPONENTS
Check air pressure of tire. Add air if air pressure lower than recommended on the tire before going on route
Check wear of tire tread. Replace tire worn below tire manufacturer’s recommendation or state requirement before
going on route
Check tires for damage. Replace any damaged tire before going on route
Inspect pump for damage or loose hardware
Decals on bumper for damage and readability
Inspect unit for refuse on or about the engine or exhaust components. Remove all refuse to prevent a fire
BODY AND CHASSIS CURB SIDE INSPECTION
Inspect level of hydraulic oil if tank is mounted on curb side. It must be full. Add recommended oil as necessary
Inspect loader hydraulics for
Cylinder, hoses and fittings for leaks
To Next Page
Loading...