Issued June 2020
Operation
Copyright 2020, Heil Environmental
Printed in U.S.A.
57
Hoses for wear and damage
Loose or missing mounting hardware
Worn fiber guards – replace hoses/fittings as necessary – MAKE SURE TO INSTALL FIBER GUARD
ON NEW HOSE TO PREVENT HYDRAULIC LEAKS REACHING ENGINE SURFACES WHICH CAN
CREATE A FIRE HAZARD
Inspect decals on body prop for damage and readability
Inspect body structure for damage, loose or missing nuts and bolts and for cracked welds and metal
Inspect body mounting brackets for cracked welds, missing bolts or nuts or movement
Inspect decals on curb side body for damage and readability
Check air pressure of tires. Add air to any tire with air pressure lower than recommended before going on route
Check wear of tire treads. Replace any tire worn below tire manufacturer’s recommendation or state requirement
before going on route
Check tires for damage. Replace any damaged tire before going on route
Inspect tailgate raise components
Cylinder, hoses and fittings for leaks
Hoses for wear and damage
Loose or missing mounting hardware
Inspect tailgate lock components
Latch components for wear or damage
Loose or missing mounting hardware
To Next Page
Loading...