Printed in U.S.A.
OIL LUBRICANT RECOMMENDATION
Use only non-detergent engine oil to lubricate all moveable
mechanical parts not furnished with grease fittings. Apply
sufficient oil to give good lubrication, but do not bathe parts
in oil. Always wipe off excess oil.
GREASE LUBRICANT RECOMMENDATION
Use a grease gun. Before engaging grease gun, clean the
fitting. Always pump enough grease to purge the joint of
contaminated grease and wipe off the excess. Lubricate a
unit as given on the lubrication decal on the unit and in
Lubrication Guide section of this manual.
Use grade NLG1000 grease or equivalent.
To Next Page
Loading...