Printed in U.S.A.
Plugged directly into the live port of the valve of each tank
and behind the FMM (Fuel Management Module) box live
line, the pressure transducer sensors measure live
pressures of each tank and of the system. When a
pressure transducer sensor fails or becomes unplugged,
Diagnostic Display along with an audible alarm.
Whenever there is a single sensor issue, the main screen
will show which sensor has failed as shown in the figure to
the top right. However, if there are multiple sensor issues, it
will tell you to go to alarm summary screen to get more
details as shown in the figure to the bottom right.
The audible buzzer will be active regardless of ignition ON
or ignition OFF and will not turn OFF until the issue is
corrected.
To Next Page
Loading...