Instructions for use Babyleo TN500 SW 1.0n 115
Operation
5 Set and confirm the interval for the selected temperature step with the rotary
knob.
6 Set and confirm the target value for the central skin temperature with the rotary
knob.
7 Set and confirm the value for the tolerated deviation from the central skin
temperature with the rotary knob.
8 Touch the On button.
9 Press the rotary knob to confirm.
The On button and the previously set buttons change to dark green.
✓ The device switches to air temperature mode. When the target value for the air
temperature is reached, a message appears.
6.17.3 Ending weaning
Weaning can be ended at any time. There are 2 ways of ending weaning:
– On the main screen on the therapy bar
– In the Weaning dialog window
Weaning ends when the set target value for the air temperature is reached. The
device continues to operate in air temperature mode with the set target value for
weaning.
6.17.3.1 Ending via the main screen
Procedure:
1 Touch the End weaning button on the therapy bar.
2 Press the rotary knob to confirm.
✓ Weaning has ended.
6.17.3.2 Ending via the dialog window
Procedure:
1 Touch the Special procedures... button in the main menu bar.
2 Open the Weaning dialog window.
3 Touch the Off button.
4 Press the rotary knob to confirm.
✓ Weaning has ended.
To Next Page
