Dräger Babyleo TN500 - Page 143

Instructions for use Babyleo TN500 SW 1.0n 143
Configuration
2 Touch the Factory defaults button and confirm.
✓ The corresponding factory setting is restored.
The following tables show the factory setting values.
8.4.1.2 Horizontal tab Patient
8.4.1.3 Horizontal tab Screen layout
Heading or parameter Description Additional information
First name Enter the first name. Either the name or identification
number can be displayed in the
header bar. If an identification num-
ber has been entered, the header
bar always displays the identifica-
tion number.
Last name Enter the last name.
Identification number Enter the identification number.
Date of birth Enter the date of birth.
Gestational age [wk + d] Enter the gestational age in weeks
and days.
Birth weight [g] Enter the birth weight.
Gender Select the gender.
Select a symbol for the patient. The symbol is also displayed in the
Family screen view.
Vertical tab Heading or parame-
ter
Description Factory setting
General settings Color scheme Select day mode or night mode
for the screen.
Day
Screen brightness
[%]
Set the screen brightness as a
percentage.
50 %
More settings Display patient
name/ID
Switch the display of the
patient name or identification
number on or off in the header
bar.
On
Display patient
weight
Switch the display of the
patient weight on or off.
On
Display suggested
air temp. range
Switch the display of the sug-
gested air temperature on or
off.
On
Colors Configure the colors for the
displayed parameters.
All parameters are dis-
played in dark blue.
Screen lock Enter and confirm the configu-
ration password.
Automatic lock Switch the automatic screen
lock on or off.
Off
Lock after Select when the screen should
be automatically locked follow-
ing a period of inactivity: 30 s,
1 min, 5 min, 15 min, 30 min.
30 s