“SETUP” and press the or hold down the
MODE (1) for a long time, then you will
directly access the Riding Mode Setup function in
the - Advanced” menu.
As soon as the new Riding Mode is confirmed, the
instrument panel checks the following conditions:
●
If the control is open, the message
“Close is displayed; the new Riding
Mode is confirmed and stored only when
control is closed and the main screen is
displayed.
●
If speed is above 5 Km/h (3 mph), control
is closed, but brakes are actuated, the message
“Release brakes” is displayed; the new Riding
Mode is confirmed and stored only when brakes
are released and the main screen is displayed.
●
If both the previously specified conditions are
true, message “Close and release
brakes” is displayed; the new Riding Mode is
confirmed and stored only when the 2
conditions are as required and the main screen is
displayed.
If either of the conditions required to validate the
change of Riding Mode are not true within 5 seconds
from activation of one of the above-described
conditions, the procedure will be the
instrument panel will go back to displaying the main
page and no will be changed.
Ducati recommends the Riding Mode
change with the motorbike at a standstill. If the
Riding Mode mode is changed while riding, be very
careful: in this case, it is recommended to change the
Riding Mode at a low speed.
129
To Next Page
Loading...
