The window (B) is displayed:
●
If the function is disabled, the stopwatch and
the indication of the available laps are displayed
in grey (C) and the text “On” (D) is shown: press
the
to enable the function.
●
If the function is enabled, the stopwatch and the
indication of the available laps are displayed in
black (E) in the light theme, in white in the dark
theme. The text (F) is also displayed: press
the
to disable the function.
Once the function is activated, the symbol (G)
indicates that the flash (1) must be used to
the stopwatch: the first time the flash
is pressed, the stopwatch flashes for 1
second.
Then, every time the flash (1) is pressed, the
stopwatch flashes for 1 second displaying the time
just completed and returns to display the time in
progress.
The current lap number is shown above the
stopwatch: a maximum of 60 laps can be recorded.
If the time just completed is the best among those
recorded up to that moment, the stopwatch displays
the time just recorded flashing for 1 second and
steadily for another 5 seconds, which it returns
Close
Back
A
00’00.00
01
/60
Lap
B
Fig 116
00’00.00
01
/60
Lap
On
00’00.00
01
/60
Lap
Of Star
C E
D F G
Fig 117
153
To Next Page
Loading...
