Tyre calibration - Default
When entering the function, by pressing the
with the “Default” item selected, the instrument
panel will display “Wait…” for a few seconds, followed
by “Default restored” for a few seconds, and then it
will return to the previous menu.
Note
During the calibration procedure, the
procedure will stop if the vehicle speed exceeds 100
km/h (62 mph) or the key is turned
Changing the final drive ratio is only allowed for
circuit (racetrack) use of the motorcycle, not on
public roads.
In the event of front sprocket and/or rear
sprocket replacement, the “Tyre
Calibration” procedure, it is necessary to go to an
authorised Ducati dealer who will a “drive
adaptive system reset” with the diagnosis
instrument. This allows you to avoid false plausibility
diagnoses related to the final drive ratio
modification.
Default
Star calibration
Tyre calibration
DRL
Coming home light
Tyre pressure
Close
Back
Vehicle
Tyre calibration
120
°C
09:09
am
N
Gear
Fig 143
180
To Next Page
Loading...
