Make sure the panniers are fixed correctly by
pulling them gently. Only this operation ensures the
correct installation of the panniers in their
engagement points.
When both panniers are installed, if the subframe kit
for aluminium panniers has been and set to
“floating” mode, check the swinging movement of
both, moving them to the right and on the rear
side of the panniers.
If there are any problems with the movement,
contact a Ducati Dealer or Authorised Service
Centre.
Pay to the safe positioning of your
hands when checking the swinging movement.
To fit/remove the subframe kit for aluminium
side panniers and to set it to “floating” or “fixed”
mode, please contact your Ducati Dealer or
authorised service centre.
Fig 31
50
To Next Page
Loading...
