2-26
Chapter 2 Basic Operation
4
Return to the Air Adjustment screen using the key.
5
Return to the MAIN menu using the key.
Separator Settings
Setting at shipment; Position at which the operating side separator is slightly touching the suction belt.
Normally, this factory setting can be used.
However adjust to other settings when using special paper, or when double-feed and miss feed
occurs frequently.
Otherwise changing the factory setting may cause double-feed or miss feed on the contrary.
Down
Up
(For North America)
(For North America,EU)
(For North America)
(For North America,EU)
To Next Page
Loading...
Need help?
General