Light-barrier adjustment
This parameter is used to adjust the light barrier for the seam start and
seam end.
Seam-start adjustment
Seam-end adjustment
Entry: -20.0 … + 20.0 mm
Selecting laser markings
A maximum of 16 lasers can be assigned to each pocket program.
With the number keys 1 to 8 on the numerical display the respective
laser (1-8) can be switched on (with asterisk) or off (no asterisk).
With the “+” key and the number keys 1 to 8 on the number keypad the
respective laser (+1-+8) can be switched on (with asterisk) or off (no
asterisk).
1= * +1=*
2= * +2=*
3= +3=
4= +4=
5= +5=
6= * +6=
7= +7=
8= +8=
4
21
To Next Page
Loading...
