Transport-carriage settings
Info line:
Return velocity
Return velocity (after sew ing)
The return velocity from the needles to the insertion station
can be reduced.
Entry: 010 … 100 %]
NB:
Even if work is interrupted the carriage moves backwards
at the same velocity.
Slide-in velocity
The slide-in velocity from the insertion station to the
needle and corner station can be reduced.
Entry: 010 … 100 %]
Carriage return w ith material f eed
After the return of the workpiece, make sure that the
operator removes the material and make free the
safety area before actuating the left pedal releasing
and returning the transport unit.
Info line:
Carriage return to insertion position
28
To Next Page
Loading...
