Programming
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 77
Important
Some settings via software are protected with a password.
Password-protected settings are used to set up the basic machine config-
uration and may only be adjusted by qualified personnel.
The password is 25483.
Displaying Help
To display Help:
1. Press the Help button.
The button is highlighted with a red circle .
2. Press the desired button for which you wish to display a Help text.
The selected button and a Help text are displayed.
3. Press on the Help text.
The Help text disappears.
⑥
Positioning point seam begin
Positioning point seam center
Positioning point seam end
p. 101
⑦
Quick selection corner knife
correction seam begin.
Quick selection corner knife
correction seam end
p. 115
p. 115
⑧
Info field displaying current status
information / program name
⑨
Toolbox
• Can be configured by service
technician
p. 144
⑩
Help p. 77
⑪
User password p. 194
⑫
Service menu p. 136
⑬
Program parameters
• Configuring pocket programs
p. 95
No. Control panel Description
To Next Page
Loading...
