DURKOPP ADLER DAC BASIC - V 12-2010

Operating structure
39
© 2010 Dürkopp Adler AG
8 Operating structure
The OP1000 control panel is used to set the machine functions and programme the parameters.
8.1 Operating structure
Categories
Parameters
o : Operator
06 : Bobbin thread counter and
bobbin thread monitor
00 - 99
13 : Needle cooling
t : Technician
00 : Backtack
01 : Thread clamp
02 : Thread trimmer
03 : Sewing foot lifting
05 : Soft start
07 : Seam ways
08 : Motor
09 : Thread tension
10 : High lift for walking foot
11 : Function module
12 : Turning Back
13 : Needle cooling
14 : Roller
...
51 : Miscellaneous of the control
52 : OP1000
...
99:
d : Developer
00 : Backtack
02 : Thread trimmer
03 : Sewing foot lifting
08 : Motor
09 : Thread tension
...
50 : Machine run blockage
51 : Miscellaneous of the control
...