DURKOPP ADLER DAC BASIC - V 12-2010 User Manual

© 2010 Dürkopp Adler AG
Programming at user level
DAC basic/classic
16
5.2 Programming stitching programme I
Stitching programme I is a standard programmable programme for sewing on labels for example.
Four partial runs with a maximum of 255 stitches can be programmed.
Programmable functionalities differ in two areas, global functions related to the sewing programme and local
functions related to the partial run.
Global functions:
•
Interlocking (NA, NE)
•
Thread clamp (FK)
•
Thread cutter (FA)
•
automatic elevation of sewing foot after thread cut
•
Soft start
Local functions:
•
Needle position when sewing stops
•
automatic elevation of sewing foot when sewing stops
•
Reduced speed
The functions can be activated directly using the buttons. When the machine is switched on they can also be
programmed in the individual seam runs S1 - S4.
You can browse forwards and backwards through the partial run parameters with the
button and the
button.
Programmed seam runs where the number of stitches = 0 will not be included when running the programme.
Changed parameters or functions are applied to the stitching programme immediately, i.e. the changes are
effective immediately.
Butto
n
Position
Setting
Settings
Display
15
Programming
partial runs S1 - S4
Enter number of
stitches for partial
run S1
21
Select partial run
S2
Enter the number of
stitches for partial
run S2

DURKOPP ADLER DAC BASIC - V 12-2010 Specifications

General

Brand	DURKOPP ADLER
Model	DAC BASIC - V 12-2010
Category	Sewing Machine
Language	English