Technical information
25
© 2010 Dürkopp Adler AG
6.2 Range of use
The DAC
basic
or DAC
classic
is not a motor drive (control unit) that can be used on its own. The control unit is
intended to be fitted into other machines, i.e. sewing units and sewing equipment in the sewing thread processing
industry and trade.
Dry, clean areas must be provided to use the DAC
basic
or DAC
classic
.
Use in wet, dusty or hazardous explosive environments is an infringement of the specified use.
Use for the intended purpose includes observing the manufacturer's prescribed conditions for operating,
maintenance and repair.
To Next Page
Loading...
Need help?
General
