DURKOPP ADLER DAC BASIC - V 12-2010 User Manual

© 2010 Dürkopp Adler AG
OP1000 control unit
DAC basic/classic
10
3.2 Abbreviations used
Abbreviations used
Meaning
VS
view speed (current speed)
SP
show position (current position in degrees)
SC
stitch counter (bobbin thread reel counter)
RB
reduced speed
P01
first stitching programme
S01:001
first seam section with a stitch
S01:BT:1
first sewing section with reverse sewing
S01S1000
first sewing section at a speed of 1000 rpm
NC
Not count (not used)
X1.1.....37
machine connector ( 37 pin sub-D machine plug)
Syn?
wait for index mark ->Move pedal forward
Ref.Pos?
Set reference position
Pos. 1?
Move needle to position 1
Pos. 2?
Move needle to position 2
Load
<- Back up
<- Dongle
Load data from dongle or back up area into control
unit.
Store
-> Back up
-> Dongle
Save data on the dongle or in the back up area of the
control unit.
Err xxxx
Error (look at chapter Error-, Warning- and
Information messages)
Wrn xxxx
Warning (look at chapter Error-, Warning- and
Information messages)
Inf xxxx
Information (look at chapter Error-, Warning- and
Information messages)

DURKOPP ADLER DAC BASIC - V 12-2010 Specifications

General

Brand	DURKOPP ADLER
Model	DAC BASIC - V 12-2010
Category	Sewing Machine
Language	English