DURKOPP ADLER DAC BASIC - V 12-2010 User Manual

© 2010 Dürkopp Adler AG
Programming at user level
DAC basic/classic
18
5.3 Programming stitching programme II
Stitching programme II is a standard programmable programme for sewing on breast pockets for example.
Six partial runs with a maximum of 255 stitches can be programmed.
Programmable functionalities differ in two areas, global functions related to the sewing programme and local
functions related to the partial run.
Global functions:
•
Interlocking (NA, NE)
•
Thread clamp (FK)
•
Thread cutter (FA)
•
automatic elevation of sewing foot after thread cut
•
Soft start
Local functions:
•
Needle position when sewing stops
•
automatic elevation of sewing foot when sewing stops
•
Reduced speed
The functions can be activated directly using the buttons. When the machine is switched on they can also be
programmed in the individual seam runs S1 - S6.
The programmed seam run S1 is repeated at the end of the stitching programme.
You can browse forwards and backwards through the partial run parameters with the
button and the
button.
Programmed seam runs where the number of stitches = 0 will not be included when running the programme.
Changed parameters or functions are applied to the stitching programme immediately, i.e. the changes are
effective immediately.
Example:
Butto
n
Position
Setting
Settings
Display
16
Programming
partial runs S1 - S4
Enter number of
stitches for partial
run S1
21
Select partial run
S2

DURKOPP ADLER DAC BASIC - V 12-2010 Specifications

General

Brand	DURKOPP ADLER
Model	DAC BASIC - V 12-2010
Category	Sewing Machine
Language	English