© 2010 Dürkopp Adler AG
Important safety instructions
DAC basic/classic
6
These operating instructions are a component part of the DAC
basic
or DAC
classic
and must be passed on to any
subsequent owners.
The instructions in the following sections are for your safety.
This symbol is a warning notice on the DAC
basic
or DAC
classic
. It indicates life threatening
voltages.
Caution - In the event of an error there may be life threatening voltages in this area even after
the electricity has been switched off (undischarged condensers).
The DAC
basic
or DAC
classic
must only be operated with a protective earthing conductor in a
working protective earthing conductor system that complies with all local regulations and
decrees.
The DAC
basic
or DAC
classic
control unit is not an independently operating unit and is intended for installation in
other machines. Commissioning is not allowed until it has been ascertained that the machine in which the control
unit is to be installed complies with the provisions of the EU Directive.
To Next Page
Loading...
Need help?
General
