Eagle KEE E15 - Table of Contents

V1.86
V 1.86
3.0 SPRAYER SETUP MENU 19
3.1 SET THE PRESET RATE 1 20
3.2 SET THE PRESET RATE 2 20
3.3 MINIMUM FLOW HOLD 20
3.4 SET THE PRESET ROW WIDTH AND SECTIONS WIDTHS 21
3.5 SET THE LOW SPEED SHUT OFF 23
3.6 SET THE TANK VOLUME 23
3.7 APPLICATION MODE 23
3.8 SET THE WHEEL CALIBRATION FACTOR 24
3.8.1 SELECT SPEED SOURCE 25
3.8.2 AUTOMATIC WHEEL CALIBRATION 25
3.8.3 MANUAL ENTRY OF WHEEL FACTOR 25
3.9 SET THE FLOW CALIBRATION FACTOR 26
3.9.1 AUTOMATIC FLOW CALIBRATION 27
3.9.2 MANUAL FLOW CALIBRATION 27
3.10 SPRAYER SETUP 2 MENU 28
3.11 SET A MANUAL SPEED 29
3.12 SET RATE INCREMENT 29
3.13 SET NUMBER OF BOOM SECTIONS 29
3.14 ENABLE DATA LOGGER 30
3.15 ENABLE FLUSH OUTPUT 30
3.16 SET FLUSH TIME 30
3.17 ENABLE FULL ROW PER SECTION 31
3.18 ENABLE AUXILIARY FUNCTION 31
3.19 SPRAYER SETUP 3 MENU 32
3.20 ENABLE PUMP SPEED SENSOR 33
3.21 ENABLE AUXILIARY SHAFT SENSOR 33
3.22 ENABLE DUMP OVERRIDE 33
3.23 SELECT DUMP MODE 34
3.24 SET THE VALVE TYPE 34
3.25 SET THE CONSOLE UNITS 34
3.26 ENABLE FAN MONITORING 35
3.27 SET NUMBER OF FANS 35
3.28 SPRAYER SETUP 4 MENU 36
3.29 ENABLE PRESSURE1 SENSOR 37
3.30 SETTING THE PRESSURE GAIN 37
3.31 SETTING THE TYPE OF PRESSURE SENSOR 37
3.32 PRESSURE SENSOR 1 CALIBRATION 38
Content Page No.
Table of Contents
1.0 MENU OVERVIEW 11
2.0 CONSOLE OVERVIEW 12
2.1 WORKING SCREEN DISPLAY 12
2.2 WORKING SCREEN BUTTON FUNCTIONS 14
2.3 MAIN MENU 17
2.4 SETUP MENU 18
3
V 1.0 11/05