Eagle KEE E15 - Enable Full Row Per Section; Enable Auxiliary Function

To Next Page

To Previous Page

E15h SPRAYER- Sprayer Setup Operation

3.17 ENABLE FULL ROW PER SECTION

Note: By default this function is selected OFF; therefore each section switch,

switches half a row ON and OFF.

When FULL ROW PER SECTION is enabled ON, then each section switch, switches

1 row ON and OFF. For example a 2 row sprayer which has only 1 solenoid

controlling each row, then ‘2’ sections would be selected in BOOM SECTIONS,

(see Section 3.13) and FULL ROW PER SECTION enabled ON.

• Press MENU

• Press ENTER to select SETUP

• Press ENTER to select SPRAYER SETUP

• Press DEC (down arrow) button, the screen advances to SPRAYER SETUP 2

• Press LINE 4 until focus is on FULL ROW PER SECTION

• Press ENTER.

An asterisk (*) will appear.

• Press INC/DEC buttons, to select ON or OFF.

• Press ENTER to accept changes.

3.18

ENABLE AUXILIARY FUNCTION

Note: The AUXILIARY function enables the operator to connect a set of lights OR

foam marker to the AUXILIARY plug on the sprayer wiring loom and switch the

lights OR foam marker ON or OFF from the console.