Eagle KEE E15 - Set the Alarm Cycle Time; Set the Alarm Duty Cycle; Set the Number of Alarm Cycles; Enable the Alarm Beeper On;Off

E15h SPRAYER- Configuration Option
8.2.2 SET THE ALARM CYCLE TIME
• Press LINE 3 to highlight ALARM CONFIG
• Press ENTER to advance to the ALARM CONFIGURATION screen
• Press ENTER to edit the ALARM CYCLE TIME.
An asterisk (*) will be displayed
• Press INC/DEC buttons, to set the ALARM CYCLE TIME
• Press ENTER to accept changes
8.2.3
SET THE ALARM DUTY CYCLE
• Press LINE 3 to highlight ALARM CONFIG
• Press ENTER to advance to the ALARM CONFIGURATION screen
• Press LINE 2 to highlight ALARM DUTY CYCLE
• Press ENTER to edit the ALARM DUTY CYCLE.
An asterisk (*) will be displayed
• Press INC/DEC buttons, to set the ALARM DUTY CYCLE
• Press ENTER to accept changes
8.2.4
SET THE NUMBER OF ALARM CYCLES
• Press LINE 3 to highlight ALARM CONFIG
• Press ENTER to advance to the ALARM CONFIGURATION screen
• Press LINE 3 to highlight ALARM CYCLES
• Press ENTER to edit the ALARM CYCLES.
An asterisk (*) will be displayed
• Press INC/DEC buttons, to set the number of ALARM CYCLES
• Press ENTER to accept changes
8.2.5
SWITCH THE ALARM BEEPER ON or OFF
• Press LINE 3 to highlight ALARM CONFIG
• Press ENTER to advance to the ALARM CONFIGURATION screen
• Press LINE 4 to highlight ALARM BEEPER
• Press ENTER to edit the ALARM CYCLES.
An asterisk (*) will be displayed
• Press INC/DEC buttons, to switch the alarm beeper ON or OFF
• Press ENTER to accept changes
82
V 1.0 11/05