Eagle KEE E15 - General Configuration; Cold Reset; Factory Reset

E15h SPRAYER- Configuration Option
8.3 GENERAL CONFIGURATION
• Press LINE 1 to select GENERAL CONFIG
• Press ENTER to select GENERAL CONFIG
• To advance to the DIAGNOSTICS MODE see Section 9.0
8.3.1 COLD RESET
• Press Line 2 to select COLD RESET
• Press ENTER.
A screen will appear
• Press ENTER. This will restore ALL settings in the console back to
Factory Defaults. The console will automatically power down and restart
automatically to the “Working Screen” with the Default settings loaded
OR
• Press MENU to exit back to the GENERAL CONFIGURATION screen.
8.3.2 FACTORY RESET
Note: A FACTORY RESET cannot be performed by the operator.
General Configuration Screen
83
V 1.0 11/05