E15 SPRAYER- Alarm Messages
10.0 ALARM MESSAGES
10.1 Alarm Messages Overview
All alarms that are present, will flash in the ‘Alarm Window’. to alert the
operator.
The frequency and whether an alarm sounds when an alarm is displayed in the
‘Alarm Window’, is set in the ALARM CONFIGURATION, see Section 8.2.
The alarm will keep flashing in the ‘Alarm Window’ till the problem is rectified.
If there is more than one alarm present then the alarms will scroll through in the
‘Alarm Window’ one alarm at a time, the first alarm will flash a number of times,
then the next alarm will flash and so forth, until all alarms have been displayed.
The ‘Alarm Window’ will then start again with the first alarm.
A list of all the alarms and an explanation for each alarm are listed on the
following pages.
Working Screen showing Alarm
94
Alarm Window
V 1.0 11/05
To Next Page
Loading...