E15h SPRAYER- Configuration Option
8.4 SWITCH CONFIGURATION
Note: The default is for the TOGGLE UP ACTIVE to be OFF. Therefore when
the Section and Master switches are switched ON, the switches are in the
down position.
When the TOGGLE UP ACTIVE is selected ON, then when the Section and
Master switches are ON they in the UP position.
• Press LINE 3 to highlight SWITCH CONFIG
• Press ENTER to advance to the SWITCH CONFIGURATION screen
• Press ENTER to edit the TOGGLE UP ACTIVE
An asterisk (*) will be displayed
• Press INC/DEC buttons, to switch the TOGGLE UP ACTIVE ON or OFF
• Press ENTER to accept changes
V 1.0 11/05
84
To Next Page
Loading...