4.4.1
ENABLE THE VOLUME LOW ALARM
• Press MENU
• Press ENTER to select SETUP
• Press LINE 2, the focus is on ALARM SETUP
• Press ENTER to select ALARM SETUP
• Press LINE 4, the focus is on TANK ALARMS
• Press ENTER to select TANK ALARMS
• Press ENTER to edit VOLUME LOW (1).
An asterisk (*) will be displayed
• Press INC/DEC buttons to set the alarm ON or OFF
• Press ENTER to accept the changes
4.4.2
SET THE VOLUME LOW POINT
• Press MENU
• Press ENTER to select SETUP
• Press LINE 2 the focus is on ALARM SETUP
• Press ENTER to select ALARM SETUP
• Press LINE 4, the focus is on TANK ALARMS
• Press ENTER to select TANK ALARMS
Note: If alarm is OFF, switch the alarm ON. See Section 4.4.1
• Press LINE 1, to move to the ALARM POINT
• Press ENTER to edit the value.
An asterisk (*) will be displayed
• Press INC/DEC buttons, to set the alarm point, in 10L increments.
• Press ENTER to accept the changes
E15h SPRAYER - Tank Alarms
52
V 1.0 11/05
To Next Page
Loading...