15
1.26 Remote Pushbutton Module
As an alternative the RTK 725B can be fully equipped with alarm windows and the Pushbutton
Module can be supplied as a remote item or the user can use conventional panel mounting
momentary, N/O, pushbuttons to control the annunciator.
In these applications the common watchdog / relay, WR, card part no CB6641POP2 is equipped
with a USB programming port which is located on the underside of the associated cell. Full
details are provided in section 2 of this manual
1.27 Audible Alarms
Two internal audible alarms are provided as standard behind the pushbutton module for use as
critical and non critical audibles.
As standard the audibles provide a steady tone but each horn can be software selected to pulse
if required. The volume of each horn is selectable in software from 0 to 100% of span and a
test volume feature is provided as described later in the manual. Please note if the pulse option
has been selected the software “test volume” function overrides the pulse feature to make
adjustment simpler.
Each channel can be set in software to activate either of the integral horns.
To Next Page
Loading...
