EasyManua.ls Logo

Eaton RTK 725B range - CE Cell Detail (Comms Enhanced Cell)

Eaton RTK 725B range
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INM 725B Rev 21
37
2.22 CE Cell Detail (Comms Enhanced Cell)
Cell type CE is used to provide:-
Enhanced Comm’s Card that provides:
One Isolated 10/100Mb/s Ethernet port via a standard 8P8C (RJ45) connector.
The Enhanced Comms card contains a BR1225 coin cell (3.0V lithium, 48mAH)
The battery in this comms card can be replaced when it reaches the end of its life. In order to
replace the battery, power down the annunciator, remove the comms card, replace the battery
and refit the comms card. Refer to page 123 for instructions on the disposal of the spent battery.
CB10257POP1 - ENHANCED COMMS CARD WITH IEC61850
COMMS CARD VERSION U SED IN "CE" CELLS
(UPPER SLOT)
PORT 3
REAR VIEW
CE
CB10257POP2 - ENHANCED COMMS CARD WITH DNP3

Table of Contents

Related product manuals