EchoNous Bladder & Vein User Guide 23
CHAPTER 2 Getting Started
Unpacking the boxes
Your EchoNous System is shipped in multiple boxes. Be careful not to insert anything sharp through the top of
the boxes when opening. Check that you have received all of the ordered components:
• An EchoNous System display (with preinstalled EchoNous System software), associated power supply, and
setup guide.
• An EchoNous Bladder probe with USB flash drive and quick reference guides.
• An EchoNous Vein probe, cable, USB flash drive, and quick reference guide.
Options
• Wireless printer (Citizen Systems Model CMP-20BTU and CMP-20IIBTIUC); not available with the EchoNous AI
Station. Not for use in patient area
• Wireless barcode scanner (not available in all countries; contact EchoNous
customer support or your
EchoNous distributor for recommended scanners)
• MODO Stand (P004013) with EchoNous power supply and probe connection cable
• EchoNous AI Station (P005149) with EchoNous HUB, power supply and necessary cables
• EchoNous AI Station 2 (P006259) with EchoNous HUB, power supply, and necessary cables
• EchoNous Carrying Case (P005900)
If any parts are missing or damaged, contact EchoNous customer support or your EchoNous distributor as soon as
possible.
Connecting and disconnecting the power supply
You should fully charge the display before using it for the first time.
To use it with the stand, connect the display to the HUB, and charge it with the HUB power supply.
To Next Page
Loading...