EchoNous Bladder & Vein User Guide 59
CHAPTER 5 Maintenance and Troubleshooting
Maintenance
The System requires no routine or periodic maintenance on either hardware or software components.
Inspect the transducer and display unit housings, connectors, and cables prior to each use for cracks; if cracks are
found, discontinue using the device immediately. Contact EchoNous
Customer Support or your EchoNous
distributor to arrange repair or replacement.
If the System behaves in an abnormal manner or when damage is suspected, discontinue using the device
immediately. Contact EchoNous
Customer Support or your EchoNous distributor to arrange repair or
replacement.
The System must be returned to EchoNous Customer Support or your EchoNous distributor to arrange battery
replacement. If you plan to dispose of the System, recycle electrical equipment and batteries where possible, and
abide by local disposal guidelines and directives.
If the System is dropped or suffers a heavy knock:
• Inspect the device. If you discover major damage do not use the device; report the fault to your EchoNous
distributor for repair.
• Switch on and check normal function of all controls.
• Tap Menu, Settings, Maintenance, then Bladder Probe Calibration to check the bladder probe inertial
sensors.
If there are any concerns about operating the device, report the faults to your EchoNous distributor for
inspection and/or repair.
• No modification of this equipment is allowed.
• This device contains no user-serviceable parts. Please contact
EchoNous customer support or your EchoNous distributor for
maintenance or repair.
• Ultrasound transducer crystals are fragile and easily damaged if
knocked, dropped, or excessively vibrated.
• Avoid unnecessary bending or winding of the connecting cable.
To Next Page
Loading...
