EasyManua.ls Logo

EchoNous Bladder - Specifications

EchoNous Bladder
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EchoNous Bladder & Vein User Guide 67
System connectivity
When powered by a fully charged battery, the System will run for more than 12 hours with an average operating
regime of 4 x 1 minute scans per hour.
From a fully discharged state, while the System is in sleep mode, the battery recharges to 80% capacity when
connected to a display power supply (charger) for three hours.
Power supplies (chargers)
EchoNous stand setup
Three optional EchoNous AI Station stands are available:
MODO Stand™ (P004013)
EchoNous AI Station™ (P005149)
EchoNous AI Station™ 2 (P006259)
Recharge the System only with the power supplies (chargers)
provided.
The EchoNous power supplies are dedicated units to be used
exclusively only with the EchoNous System.
Do not open or modify the EchoNous Power Supply P003198 or any
other supplied power supplies - Risk of electric shock
Only connect to an AC supply rated at 100-240V and 50-60Hz.
Do not use the device or power supplies (chargers) if there are signs
of damage.

Table of Contents

Related product manuals