Registering
a
cell
phone
Cell phones can
be
registered
in
the main unit.
There are two methods that can be used to
register a cell phone
in
the main unit.
The cell phone itself can be used or search for
cell phones using the main unit. A maximum
of
five cell phones can
be
registered
in
the main
unit. Priority of connection will always be
in
sequential order from 1 to
5.
As cell phones are
added and deleted, the order will always go by
the numbered sequence.
Registering using a cell phone
If a cell phone
is
currently connected. it must be
disconnected prior to registration of additional
cell phones.
I
Press
the
[SELECT] (Up/Down)
to
select
Registration
within
the
Phone
Setting
mode.
lEI
Press
the
[ENTER]
button.
rnATTENTION
NO ENTRY will
be
displayed if available. If not,
a double beep will be heard if the phone
registration memory
is
not available or full.
II
Press
the
[SELECT] (Up/Down)
button
to
select
Allow
Connect.
1:1
Press
the
[ENTER]
button.
The "Waiting" message appears on
the display.
I!I
Use
the
cell
phone
to
input
the
iii
passcode.
The default passcode is 1234.
mATTENTION
• For details on
how
to
operate the cell
phone, read its instruction manual.
The
Bluetooth
hands-free
function
• Be sure to perform the registration
of
the
cell phone only while the "Waiting" message
is on the display.
I
When
the
registration
has
been
•
completed,
the
"COMPLETED"
message
appears
on
the
display.
The cell phone
is
now registered to the
main unit
(:.e
and
~II
appear on the display.)
If the registration has not been
successfully completed, the "FAILED"
message appears on the display.
Repeat the registration procedure.
rnATTENTION
•
To
register another cell phone to the main
unit, press the [RTN/BAND] button twice
after Step 6. Perform the registration
procedure from the registered cell phone
selection mode in Step
1.
• You cannot register a cell phone that has
already been registered.
• The hands-free function and the audio
function
of
the cell phone can be connected
at the same time for some cell phones.
Searching
for
cell phones to be
registered
I
Press
the
[SELECT] (Up/Down)
to
select
Registration
within
the
Phone
Setting
mode.
lEI
Press
the
[ENTER]
button.
mATTENTION
NO ENTRY will be displayed if available. If not,
a double beep will
be
heard if the phone
registration memory
is
not available or full.
53
•
To Next Page
Loading...
