Automatically
storing
stations
into
memory. (The
automatic
preset mode: ASM)
1
Press
the
[SELECT] (Up)
button
for
more
than
two
seconds,
until
you
hear
a beep.
The automatic preset mode starts.
"ASM
ON"
will appear
on
the display,
and
stations are automatically entered
in
memory under buttons
[1]
to
[6].
These buttons are called preset
buttons.
rnATTENTION
• Pressing
the
preset buttons ([1] to [6])
allows you to make one-touch station
selections. The frequency
of
the selected
station is indicated on.
• When a new station is set in memory, the
station previously set in
memory
will be
deleted.
•
If
there are
fewer
than six receivable
stations, the stations set in the remaining
buttons will be retained.
~CAUTION
'~
If the vehicle's battery is disconnected (for
repairs to the vehicle
or
for removing the
main unit), all stations
in
memory will be
lost.
In
such a case, store stations
in
the
memory again.
How
to
operate the
tuner
Manually
storing
stations
into
memory
Store a station to a preset button.
I
Press
the
[SELECT] (Right/Left)
button
to
tune
to
the
station
that
you
want
to
store
in
memory.
II
Select
any
button,
from
[1]
to
[6],
and
press
it
for
more
than
two
seconds.
The selected station is now stored
in
a preset button.
Repeat the above procedure to store •
additional stations one at a time
in
buttons [1] to [6], and store them
in
memory.
~CAUTION
If the vehicle's battery
is
disconnected (for
repairs to the vehicle or for removing the
main unit), all stations
in
memory will be
lost.
In
such a case, store stations
in
memory again.
Preset station scan
This function enables reception
of
all the stations
in
the preset buttons for five seconds each.
II
Press
the
[SELECT] (Down)
button
for
more
than
one
second.
"P SCAN" will appear on the display,
and stations stored under preset
buttons [1] through [6] will be played
for five seconds each.
II
When
your
desired
station
is
displayed,
press
the
[SELECT]
(Down)
button
again.
The main unit will stay tuned to the
desired station.
43