Various
Settings
I
Press the [SELECT] (Up/Down)
button to set the clock display to
ON
or
OFF.
~ATTENTION
The clock display can also be turned
on
and off
by pressing the button
[6]
while the power
is
turned off.
Setting time (Clock Adjust)
This main unit uses the 12-hour display notation.
II
Press the [SELECT] (Up/Down)
button to select Clock Adjust.
I Press
the
[ENTER]
button.
The clock setting mode is activated.
I
Press the [SELECT] (Right/Left)
button to select the item to be
adjusted.
Right:
Minutes will be switched.
Left:
Hours will be switched.
II
Press the [SELECT] (Up/Down)
III
button to adjust the time.
Up:
Turns the time forward.
Down:
Turns the time back.
IIPress the [ENTER] button.
78
Switching demonstration screen
display (Demo)
Demonstration screen display settings can be
performed. Default setting
is
ON.
If the demonstration screen display
is
set to ON,
operation, motion picture, and other screens will
be displayed
in
succession.
If you press a button while the demonstration
screens are being displayed, the demonstration
screens will be cancelled and the audio operation
screen will
be
displayed. If you do not operate
the status display function within
15
seconds, the
display will return automatically to the demo
screen.
II
Press the [SELECT] (Up/Down)
button to select Demo.
I Press
the
[ENTER]
button.
The demo display setting mode is
activated.
R Press the [SELECT] (Up/Down)
iii
button to select Demo ON/OFF.
To Next Page
Loading...
