IIPress the [RTN/BAND) button.
The portable device
is
set as a
Bluetooth audio source.
~ATTENTION
• The Bluetooth audio (BT-Audio) function
can only be selected in the audio mode
when the
BT
Audio Set selection mode is
set to ON.
• The default setting
for
the Bluetooth audio
mode is OFF (BT-Audio selection is
disabled).
Connecting
the
main
unit
and
the
portable
device
I
Press the [SELECT] (Up/Down)
button
while
in
the
BT-Audio Set
selection
mode
to
select
Connect.
BPress
the
[ENTER]
button.
The "Waiting" message appears
on
the display.
~ATTENTION
Press the [RTN/BAND] button to change the
portable device to
be
connected. The BT-
Audio Set selection mode
is
activated again.
I!Ilnput
the
passcode
using
the
iii
portable device.
The default setting value of the
passcode
is
1234.
~ATTENTION
• For details on how to operate the portable
device, read its instruction manual.
• Be sure
to
perform the connection
of
the
portable device
only
while the "Waiting"
message is on the display.
The
Bluetooth
audio
function
I
When
the
connection
has been
~
completed,
the
"COMPLETED"
message appears
on
the display.
The portable device is now connected
to
the main unit.
(=e
and
1"
appear
on
the display.)
If the connection has not been
successfully completed, the "FAILED"
message appears
on
the display.
~ATTENTION
•
If
the portable device is still connected, •
disconnect it.
•
If
the connection has not been successfully
completed, and the "FAILED" message
appears on the display, connect the
portable device again, following the
procedure from the
BT
Audio Set selection
mode
in
Step
1.
• The passcode is a password used when
connecting the portable device to the main
unit.
• When the audio
of
the cell phone is
connected, hands-free can be connected at
the same time for some devices.
If
you
want
to be able to use the hands-free function,
perform the hands-free connection
procedure again.
Disconnecting
the
main
unit
and
the
portable
device
I
Press
the
[SELECT] (Up/Down)
button
while
in the
BT
Audio
Set
selection
mode
to
select
Disconnect.
BPress the [ENTER) button.
The "Disconnect ?" message appears
on
the display.
39
To Next Page
Loading...
